- NAME
- place — Geometry manager for fixed or rubber-sheet placement
- SYNOPSIS
- DESCRIPTION
- place window option value ?option value ...?
- place configure window ?option? ?value option value ...?
- -anchor where
- -bordermode mode
- -height size
- -in container
- -relheight size
- -relwidth size
- -relx location
- -rely location
- -width size
- -x location
- -y location
- place forget window
- place info window
- place slaves window
- place content window
- FINE POINTS
- EXAMPLE
- SEE ALSO
- KEYWORDS
place — Geometry manager for fixed or rubber-sheet placement
place option arg ?arg ...?
The placer is a geometry manager for Tk.
It provides simple fixed placement of windows, where you specify
the exact size and location of one window, called the content,
within another window, called the container.
The placer also provides rubber-sheet placement, where you specify the
size and location of the content in terms of the dimensions of
the container, so that the content changes size and location
in response to changes in the size of the container.
Lastly, the placer allows you to mix these styles of placement so
that, for example, the content has a fixed width and height but is
centered inside the container.
- place window option value ?option value ...?
-
Arrange for the placer to manage the geometry of a content whose
pathName is window. The remaining arguments consist of one or
more option-value pairs that specify the way in which
window's geometry is managed. Option may have any of the
values accepted by the place configure command.
- place configure window ?option? ?value option value ...?
-
Query or modify the geometry options of the content given by
window. If no option is specified, this command returns a
list describing the available options (see Tk_ConfigureInfo for
information on the format of this list). If option is specified
with no value, then the command returns a list describing the
one named option (this list will be identical to the corresponding
sublist of the value returned if no option is specified). If
one or more option-value pairs are specified, then the command
modifies the given option(s) to have the given value(s); in this case
the command returns an empty string.
The following option-value pairs are supported:
- -anchor where
-
Where specifies which point of window is to be positioned
at the (x,y) location selected by the -x, -y,
-relx, and -rely options.
The anchor point is in terms of the outer area of window
including its border, if any.
Thus if where is se then the lower-right corner of
window's border will appear at the given (x,y) location
in the container.
The anchor position defaults to nw.
- -bordermode mode
-
Mode determines the degree to which borders within the
container are used in determining the placement of the content.
The default and most common value is inside.
In this case the placer considers the area of the container to
be the innermost area of the container, inside any border:
an option of -x 0 corresponds to an x-coordinate just
inside the border and an option of -relwidth 1.0
means window will fill the area inside the container's
border.
If mode is outside then the placer considers
the area of the container to include its border;
this mode is typically used when placing window
outside its container, as with the options -x 0 -y 0 -anchor ne.
Lastly, mode may be specified as ignore, in which
case borders are ignored: the area of the container is considered
to be its official X area, which includes any internal border but
no external border. A bordermode of ignore is probably
not very useful.
- -height size
-
Size specifies the height for window in screen units
(i.e. any of the forms accepted by Tk_GetPixels).
The height will be the outer dimension of window including its
border, if any.
If size is an empty string, or if no -height or
-relheight option is specified, then the height requested
internally by the window will be used.
- -in container
-
Container specifies the path name of the window relative
to which window is to be placed.
Container must either be window's parent or a descendant
of window's parent.
In addition, container and window must both be descendants
of the same top-level window.
These restrictions are necessary to guarantee
that window is visible whenever container is visible.
If this option is not specified then the other window defaults to
window's parent.
- -relheight size
-
Size specifies the height for window.
In this case the height is specified as a floating-point number
relative to the height of the container: 0.5 means window will
be half as high as the container, 1.0 means window will have
the same height as the container, and so on.
If both -height and -relheight are specified for a content,
their values are summed. For example, -relheight 1.0 -height -2
makes the content 2 pixels shorter than the container.
- -relwidth size
-
Size specifies the width for window.
In this case the width is specified as a floating-point number
relative to the width of the container: 0.5 means window will
be half as wide as the container, 1.0 means window will have
the same width as the container, and so on.
If both -width and -relwidth are specified for a content,
their values are summed. For example, -relwidth 1.0 -width 5
makes the content 5 pixels wider than the container.
- -relx location
-
Location specifies the x-coordinate within the container window
of the anchor point for window.
In this case the location is specified in a relative fashion
as a floating-point number: 0.0 corresponds to the left edge
of the container and 1.0 corresponds to the right edge of the container.
Location need not be in the range 0.0-1.0.
If both -x and -relx are specified for a content
then their values are summed. For example, -relx 0.5 -x -2
positions the left edge of the content 2 pixels to the left of the
center of its container.
- -rely location
-
Location specifies the y-coordinate within the container window
of the anchor point for window.
In this case the value is specified in a relative fashion
as a floating-point number: 0.0 corresponds to the top edge
of the container and 1.0 corresponds to the bottom edge of the container.
Location need not be in the range 0.0-1.0.
If both -y and -rely are specified for a content
then their values are summed. For example, -rely 0.5 -x 3
positions the top edge of the content 3 pixels below the
center of its container.
- -width size
-
Size specifies the width for window in screen units
(i.e. any of the forms accepted by Tk_GetPixels).
The width will be the outer width of window including its
border, if any.
If size is an empty string, or if no -width
or -relwidth option is specified, then the width requested
internally by the window will be used.
- -x location
-
Location specifies the x-coordinate within the container window
of the anchor point for window.
The location is specified in screen units (i.e. any of the forms
accepted by Tk_GetPixels) and need not lie within the bounds
of the container window.
- -y location
-
Location specifies the y-coordinate within the container window
of the anchor point for window.
The location is specified in screen units (i.e. any of the forms
accepted by Tk_GetPixels) and need not lie within the bounds
of the container window.
If the same value is specified separately with
two different options, such as -x and -relx, then
the most recent option is used and the older one is ignored.
- place forget window
-
Causes the placer to stop managing the geometry of window. As a
side effect of this command window will be unmapped so that it
does not appear on the screen. If window is not currently managed
by the placer then the command has no effect. This command returns an
empty string.
- place info window
-
Returns a list giving the current configuration of window.
The list consists of option-value pairs in exactly the
same form as might be specified to the place configure
command.
- place slaves window
-
Returns a list of all the content windows for which window is the container.
If there is no content for window then an empty string is returned.
- place content window
-
Synonym for place slaves window.
If the configuration of a window has been retrieved with
place info, that configuration can be restored later by
first using place forget to erase any existing information
for the window and then invoking place configure with
the saved information.
It is not necessary for the container window to be the parent
of the content window.
This feature is useful in at least two situations.
First, for complex window layouts it means you can create a
hierarchy of subwindows whose only purpose
is to assist in the layout of the parent.
The
“real children”
of the parent (i.e. the windows that
are significant for the application's user interface) can be
children of the parent yet be placed inside the windows
of the geometry-management hierarchy.
This means that the path names of the
“real children”
do not reflect the geometry-management hierarchy and users
can specify options for the real children
without being aware of the structure of the geometry-management
hierarchy.
A second reason for having a container different than the content's
parent is to tie two siblings together.
For example, the placer can be used to force a window always to
be positioned centered just below one of its
siblings by specifying the configuration
-in sibling -relx 0.5 -rely 1.0 -anchor n -bordermode outside
Whenever the sibling is repositioned in the future, the content
will be repositioned as well.
Unlike many other geometry managers (such as the packer)
the placer does not make any attempt to manipulate the geometry of
the container windows or the parents of content windows (i.e. it does not
set their requested sizes).
To control the sizes of these windows, make them windows like
frames and canvases that provide configuration options for this purpose.
Make the label occupy the middle bit of the toplevel, no matter how it
is resized:
label .l -text "In the\nMiddle!" -bg black -fg white
place .l -relwidth .3 -relx .35 -relheight .3 -rely .35
grid, pack
geometry manager, height, location, container, place, rubber sheet, content, width
Copyright © 1992 The Regents of the University of California.
Copyright © 1994-1996 Sun Microsystems, Inc.