More channel I/O - fblocked & fconfigure

The previous lessons have shown how to use channels with files and blocking sockets. Tcl also supports non-blocking reads and writes, and allows you to configure the sizes of the I/O buffers, and how lines are terminated.

A non-blocking read or write means that instead of a gets call waiting until data is available, it will return immediately. If there was data available, it will be read, and if no data is available, the gets call will return a 0 length.

If you have several channels that must be checked for input, you can use the fileevent command to trigger reads on the channels, and then use the fblocked command to determine when all the data is read.

The fblocked and fconfigure commands provide more control over the behavior of a channel.

The fblocked command checks whether a channel has returned all available input. It is useful when you are working with a channel that has been set to non-blocking mode and you need to determine if there should be data available, or if the channel has been closed from the other end.

The fconfigure command has many options that allow you to query or fine tune the behavior of a channel including whether the channel is blocking or non-blocking, the buffer size, the end of line character, etc.

fconfigure channel ?param1? ?value1? ?param2? ?value2?
Configures the behavior of a channel. If no param values are provided, a list of the valid configuration parameters and their values is returned.

If a single parameter is given on the command line, the value of that parameter is returned.

If one or more pairs of param/value pairs are provided, those parameters are set to the requested value.

Parameters that can be set include:

The example is similar to the lesson 40 example with a client and server socket in the same script. It shows a server channel being configured to be non-blocking, and using the default buffering style - data is not made availalble to the script until a newline is present, or the buffer has filled.

When the first write:

puts -nonewline $sock "A Test Line"
is done, the fileevent triggers the read, but the gets can't read characters because there is no newline. The gets returns a -1, and fblocked returns a 1. When a bare newline is sent, the data in the input buffer will become available, and the gets returns 18, and fblocked returns 0.

Example

proc serverOpen {channel addr port} {
    puts "channel: $channel - from Address: $addr  Port: $port"
    puts "The default state for blocking is: [fconfigure $channel -blocking]"
    puts "The default buffer size is: [fconfigure $channel -buffersize ]"

    # Set this channel to be non-blocking.
    fconfigure $channel -blocking 0
    set bl [fconfigure $channel -blocking]
    puts "After fconfigure the state for blocking is: $bl"
  
    # Change the buffer size to be smaller
    fconfigure $channel -buffersize 12
    puts "After Fconfigure buffer size is: [fconfigure $channel -buffersize ]\n"

    # When input is available, read it.
    fileevent $channel readable "readLine Server $channel"
}

proc readLine {who channel} {
    global didRead
    global blocked

    puts "There is input for $who on $channel"

    set len [gets $channel line]
    set blocked [fblocked $channel]
    puts "Characters Read: $len  Fblocked: $blocked"

    if {$len < 0} {
        if {$blocked} {
            puts "Input is blocked"
        } else {
            puts "The socket was closed - closing my end"
            close $channel;
        }
    } else {
        puts "Read $len characters:  $line"
        puts $channel "This is a return"
        flush $channel;
    }
    incr didRead;
}

set server [socket -server serverOpen 33000]

after 120 update;	# This kicks MS-Windows machines for this application

set sock [socket 127.0.0.1 33000]

set bl [fconfigure $sock -blocking] 
set bu [fconfigure $sock -buffersize]
puts "Original setting for sock: Sock blocking: $bl buffersize: $bu"

fconfigure $sock -blocking No
fconfigure $sock -buffersize 8;

set bl [fconfigure $sock -blocking] 
set bu [fconfigure $sock -buffersize]
puts "Modified setting for sock: Sock blocking: $bl buffersize: $bu\n"

# Send a line to the server -- NOTE flush

set didRead 0
puts -nonewline $sock "A Test Line"
flush $sock;

# Loop until two reads have been done.

while {$didRead < 2} {
    # Wait for didRead to be set
    vwait didRead
    if {$blocked} {
        puts $sock "Newline"
        flush $sock
        puts "SEND NEWLINE"
    }
}
  
set len [gets $sock line]
puts "Return line: $len -- $line"
close $sock
vwait didRead
catch {close $server}